Wide temperature -40-70℃ POE injector gigabit at standard 30w output

Wide temperature -40-70℃ POE injector gigabit at standard 30w output

Categories: Tags:
  • 描述
  • Inquiry

Wide temperature Gigabit POE injector PSE5230E-AT

As the applications of Power over Ethernet have expanded to end users from the IT industry. This Single-Port PoE Injector meets the requirements of both the IT industry and home users for high wattage output and easy installation. It is a wall-mountable single-port PoE injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, It helps users to utilize just one Ethernet cable to easily install and deploy IP camera, wireless AP or VoIP phone networking in environments where power outlet is hard to find.



PoE function

Remote power feeding up to 100m

Supports PoE Power up to 30W for PoE port

IEEE 802.3at Power over Ethernet Plus compliant

Backward compatible with IEEE 802.3af Power over Ethernet

Auto-detection of PoE IEEE 802.3at/af devices from being damaged by incorrect installation

Circuit protection prevents power interference between ports

Circuit Shorting Protection Supported

Wide temperature -40-70℃

Energy conservation, and low radiation

The POE Injectors uses an energy-saving integrated circuit design to ensure even heat dissipation. Idle ports can enter a sleep mode to further reduce power consumption. Radiation produced by the POE Injectors is within the standard range for electric appliances and causes no harm to the human body.


Easy deployment and maintenance free

With concepts of “Easy to install”, “Plug and Play” and “Simple troubleshooting” for business and home users, the POE Injectors is an all-in-one designed single-port PoE injector with internal power supply. In the compact size housing, the POE Injectors provides one 110-240V AC input socket on its front panel and two RJ-45 ports (POE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and the POE Injectors  is ready to provide high speed network communication and high power PoE injector functions simultaneously with no need of software configuration. The POE Injectors frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.


Items PSE5230E-AT
“Data” Input Port: 1*10/100/1000 Base-T
“PoE (Data+Power)” Output Port 1*10/100/1000 Base-T
 AC Input Power Socket 1
PoE Standards IEEE 802.3af/at
Power Pin Assignment 1/2(+),3/6(-),(End-Span)
PoE Power Output 56V DC 0.55A DC
Packet Forwarding Capacity 10M:14880pps/port
Operating environment Operating temperature: -40℃–70℃
Relative humidity: 5%–95% (non-condensing)
Dimensions L166*W57*H40mm
Weight <200g
Input Voltage AC:110~240V/50~60Hz
Software specification
Items PSE5230E-AT-30W
Standards IEEE 802.3af,Power Over Ethernet
IEEE 802.3at,Power Over Ethernet Plus
IEEE 802.3,10BASE-T
IEEE 802.3u,100 BASE-TX
IEEE 802.3ab,1000 BASE-T
Auto-MDI/MDI-X Supported
Auto-Negotiation Supported
Transmission Media 10Base T: Cat. 3, 4, 5 UTP/STP
100Base TX: Cat. 5, 5e UTP/STP
1000Base T: Cat. 5e, 6, 7 UTP/STP