Outdoor POE++ 60/90w POE injector active 802.3af/at

Outdoor POE++ 60/90w POE injector active 802.3af/at

90w active POE injector

  • 描述
  • Inquiry

Product Feature
 1. Single-port Midspan  
PSE90-TO-LT Power over Ethernet (PoE) single- port Midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 90 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal.
2.Wide Temperature
The PSE90-TO-LT work well during the complex environment within temperature -40ºC-85ºC,Output 90W, 1.73A, can meet most high-power PD in the market.
3.Lightning Surge Protection
Provide 8 lines power& signal 6KV(10/700us) lightning-protection for PD escape from lightning strikes. Shell casing, IP67 Waterproof jacket protection on the connector.
4.Waterproof& Easy install
PSE90-TO-LT with shell casing IP66 can installed outdoor for using.Tthere are four mounting holes to fixed to the wall by  tied to shelf.
5. Provide Power with AT detection chip
Use of Linaer American company chip, the chip can adapt to the complex working environment requirements
PSE90-TO-LT with AT(Support POE/POE+/POE++) chip will detect if the PD is standard. then output +55VDC.


Model PSE90-TO-LT
port LAN 1 port 1000M  RJ45
POE 1 port 1000M  RJ45
AC 1 port AC port: three-pin circle plug
Environmental Working Temperature:-40ºC~85ºC
Working Humidity :10%~90% RH  non-condensing
Storage temperature:-45ºC~85ºC
Storage Humidity:5%~90% RH  non-condensing
Cooling mode Natural cooling,No fan
Shell material IP67 Grade,aluminum material
Input Power DCIN:DC 50V~DC57V  MAX 100W
AC IN:AC100~265V 60~60Hz  MAX 105W
POE IEEE802.3af/IEEE802.3at
Support  PoE / PoE+ / LTPoE++  PD
Power Pin: 4/5(+), 7/8(-) and 3/6(+),1/2(-)
Output Voltage: 55V
utput Current: 1.73A
lightning protection Meet 802.11 Electrical Standard
Meet IEC61000-4-5, GBT17626.5 surge test standard
Meet IEC61000-4-2, GBT17626.2 surge test standard
By 10.700uS and 1.2/50-8/20uS (40ohm resistance) surge test
DC IN: 6KV/6KV(common mode / Differential mod)
RJ45: 6KV/3KV(common mode / Differential mod)
PHY : 1.5KV(common mode / Differential mod)
Standards Protocols IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-Tx Fast Ethernet
IEEE802.3ab 1000Base-T Gigabit Ethernet
Support 10/100/1000Base-T LAN
Support for IEEE802.3af/at PD
MTBF: 100,000 h.@25ºC
Network Media 10Base-T: Pair 2 Category 3(Cat3) and above UTP/STP(≤80m)
100Base-TX: Pair 2 Category 5(Cat5) and above UTP/STP(≤80m)
1000Base-T: Pair 4 Category 5(Cat5e) and above UTP/STP(≤80m)
1000Base-T: Pair 4 Category 6(Cat6e) and above UTP/STP(≤90m)