L3 managed Optical convergence switch 24*GIGA SFP with 4*10G SFP+

L3 managed Optical convergence switch 24*GIGA SFP with 4*10G SFP+

  • 描述
  • Inquiry
 Model S5832G-4SE
  L3 managed Optical convergence switch
Fixed Port 16*1000/1000M SFP

8*10/100/1000Base-TX RJ45 / 100/1000M SFP COMBO

4*100M/1000M/10000M SFP+

Reset Key 1
Network Protocol IEEE 802.3

IEEE 802.3u 100BASE-TX

IEEE 802.3ab1000BASE-T

IEEE 802.3x

IEEE 802.3z 1000BASE-X

IEEE 802.3ad

IEEE 802.3q 、IEEE 802.3q/p

IEEE 802.1w、IEEE 802.1d 、IEEE 802.1S

STP(Spanning Tree Protocol)

RSTP/MSTP( Rapid Spanning Tree Protocol)

Transmission Mode Store and Forward (full wirespeeed)
Jumbo frame Jumbo frame up to 12KB
Bandwidth 512Gbps
Packet Forwarding 92.32Mpps
MAC Address 16K
Buffer 12Mbit SRAM Packet Buffer
Transmission Distance 10BASE-T : Cat3,4,5 UTP(≤250 meter)

100BASE-TX : Cat5 or later UTP(≤100 meter)

1000BASE-TX : Cat6 or later UTP(≤1000 meter)

1000BASE-SX:62.5μm/50μm MMF(2m~550m)

1000BASE-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m)

RAM 128M
Watt ≤36W
LED Indicator PWR:Power LED

SYS:(System LED)

1~24:Link/ACT LED+ 1G LED

4-24: LINK/ATC+10G LED

Power Redundant dual power input

Built-in power AC 100~240V 50/60HZ

Operating Temperature/Humidity -20~+55°C;5%~90% RH Non coagulation
Storage Temperature/Humidity -40~+75°C;5%~95% RH Non coagulation
Product size/Packing size(L*W*H) 440mm*210mm*45mm


N.W/G.W(kg) 3.4kg/4.1kg
Installation Rack-mount(optional machine hanger spare parts)
Lightning protection level 3KV 8/20us;


Certificate CE mark, commercial;CE/LVD EN60950;
FCC Part 15 Class B;RoHS;
Warranty Whole device for 1 year(Accessories not included)


Software feature

Port Shutdown Support
Port Speed Support auto-negotiation full-1000, full-100, half-100, full-10, half-10
Flow Control support full-duplex IEEE 802.3x, half-duplex back pressure
Storm Control Supports rate limit for broadcast, multicast, and DLF packets
Storm Constrain Support the detection of broadcast packets, multicast packets,

or unicast packets on the port, shutdown the port if the rate is over the threshold.

Port Mirror Support
Port Rate Limit Support port ingress and egress rate limit
Link Aggregation Support manual link aggregation

Support LACP dynamic link aggregation

Supports up to 32 aggregation groups, each group up to 8 ports

Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy

Port Isolate Support
Jumbo Frame Support up to 16KB packet
Redundant Port Support
MAC Table Capacity 16K
MAC Table Management Support
Forwarding mode Support IVL forwarding mode
Static MAC Address Support
MAC Address Binding Support
MAC Address Filtering Support
MAC Learning Control Control the MAC learning based on port
Number of VLANs 4K
802.1q-based VLAN Support
MAC-based VLAN Support
IP-based VLAN Support
Protocol-based VLAN Support
Voice VLAN Support
VLAN Mapping Support 1:1 mapping
QinQ Support basic QinQ

Support flexible QinQ

Spanning Tree Protocol Support STP/RSTP/MSTP
Port Loop Detection Support
EAPS Support
ERPS Support G.8032/Y.1344
UDLD Fully compatible with CISCO’s UDLD protocol
VLLP (VRRP Layer-2 Loop Protection) Support, Only used with VRRP
ARP Support static and dynamic ARP
Static Route Support
VLAN Interface Support 32 VLAN interfaces
RIP Support RIP v1/v2
OSPF Support OSPFv2
Policy Route Support
VRRP Support
Static Multicast MAC Address Support

Support IGMP Querier

Support IGMP SNOOPING Filter

MVR Support
GMRP Support
Standard IP-based ACL Support
Extended IP based ACL Support
MAC IP-based ACL Support
MAC ARP-based ACL Support
ACL Port Filtering Support
Time-based ACL Support
Port Queue Number 8
Port Queue Scheduling Mode Support WRR,RR,WDRR,SP
Port-based Classification Support
802.1p-based Classification Support
DSCP-based Classification Support
ACL-based Classification Support
QoS Policy Support packets mapping to queue

Support COS or DSCP Remarking

Support rate limits of data flow

Support data flow statistics

Support mirroring of data flow

DHCP Client Support
DHCP Snooping Support
DHCP Relay Support
DHCP Server Support
DHCP option 82 Support
CLI  Management Support Console, Telnet and SSH
WEB Management Support HTTP and HTTPS
SNMP Management Support SNMP v1, v2c


Support lots of standard and private MIBs

User Management Support multiple user management
Log Management Support local log management

Support SYSLOG

RMON Support RMON 1, 2, 3 and 9 groups
Cluster Management Support NDP

Support NTDP

Support manual and automatic joining of cluster groups

Support cluster unified management

Configuration File Support uploading and downloading configuration file
Upgrade software Support
Clock Management Support local clock management

Support SNTP

Switch Management Security Support enabling and disabling TELNET, WEB and SNMP services

Support TELNET, WEB and SNMP services to bind to standard IP ACLs

Support for limiting the number of TELNET connections

CPU Protection The switch’s own security protection prevents large data streams from attacking the switch itself.
AAA Support 802.1x

Support RADIUS

Supports authentication, authorization, and accounting through RADIUS server

Support port-based and MAC-based 802.1x

Support 802.1x guest VLAN

IP MAC Binding Support static configuration of IP, MAC and port binding
DHCP SNOOPING Support dynamic ARP binding to prevent ARP spoofing

Support dynamic IP, MAC and port binding

Support fixed port to connect to DHCP server to prevent private connection to DHCP server

Prevent ARP Spoofing Support manually configuring MAC ARP-based ACL rules to prevent ARP spoofing.

Support the DHCP SNOOPING function. During the process of obtaining an IP address by DHCP, the switch dynamically binds ARP to the port to prevent ARP spoofing.

Switch Control Support POE powering of ports on and off
Power Control Support setting total power
Other Advanced Features Support POE scheduling policy and PD online query, etc.
PING Support
TELNET Client Support