Industrial POE Switch 8 ports POE+2SFP Unmanaged

Industrial POE Switch 8 ports POE+2SFP Unmanaged

  • 描述
  • Inquiry

 

Industrial 8GE+2SFP Full Gigabit PoE Switch

Model G10P8G2S
Downlink Port 8*10/100/1000M RJ45

Port 1~8 support IEEE802.3af/at (single port power MAX 30W)

Uplink Port 2*1000M SFP
Ai Function PoE watchdog auto execution when PoE is on;

auto detection and fault device resetting.

DIP Switch FDOG:Fiber port watchdog enable: will reboot the switch when there is no fiber optical signal ,

PDOG:POE watchdog enable

VLAN: Ports isolation, 1-8 ports will be isolated when DIN switch ON
EXER:1-8 ports transmission rate 10Mbps,extend POE to 250m when DIP switch ON
PCK=24V POE output when DIP switch ON, 48V POE output when DIP Switch OFF(For auto POE version)

 

Switch CHIP RTL8370MBI
Network protocol IEEE 802.3x

IEEE 802.3、IEEE 802.3u、IEEE 802.3ab、IEEE 802.3z

IEEE 802.3ad

IEEE 802.3q 、IEEE 802.3q/p

IEEE 802.1w、IEEE 802.1d 、IEEE 802.1S

IEEE 802.3z 1000BASE-X

IEEE802.3af/at/POE++/BT

Port Specification 1-8 port 10/100/1000BaseT(X)auto detection,AUTO-MDI/MDI-X
Transmission Mode Store and Forward (full wirespeed)
Bandwidth 20Gbps
Packet Forwarding 14.44Mpps
MAC 4K
Buffer 1.5M
Transmission Distance 10BASE-T : Cat3,4,5 UTP(≤250 meter)

100BASE-TX : Cat5 or later UTP(≤100 meter)

1000BASE-TX : Cat6 or later UTP(≤1000 meter)

1000BASE-SX:62.5μm/50μm MMF(2m~550m)

1000BASE-LX:62.5μm/50μm MM(2m~550m) or 10μm SMF(2m~5000m)

BIDI supported

Watt Standby power consumption≤5W;

Full-load power consumption≤200W;

 
Operating Temperature/Humidity -40~+80°C;10%~90% RH No coagulation  
Storage Temperature/Humidity -40~+85°C;5%~95% RH No coagulation  
Lightning Protection Level 6KV 8/20us;8KV ESD

IP40

 
Product Size/Packing Size(L*W*H) 160*130*50mm

310*210*60mm

 
N.W/G.W(kg) 0.95/1.2kg  
Installation DIN guide rail type(additional wall hangers)  
Warranty Whole device for 1 year(Accessories not included)