4K UHD HDMI Extender over optical fiber

4K UHD HDMI Extender over optical fiber

HDMI extender over fiber with KVM

Categories: Tags:
  • 描述
  • Inquiry

Description

HDMI (High-Definition Multimedia Interface) recently has become increasingly popular in the application of video and audio transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. Smartopcom DVI/HDMI extender uses 2 cores fiber without any copper wire inside, where radio frequency interference phenomenon is literally ruled out, which shows the advantage of high performance and good signal quality as well as low cost.

 

High Performance — The HFX-2100 series is a high performance 4K Optical Extender that transmits high resolution DVI / HDMI signals over extreme distances using 2 cores fiber.  This extender supports HDMI v1.4(non-HDCP) signals with resolutions up to 4K (4096×2160 / 30p) over cable distances up to 60Km(According to the SFP+ Transceivers and fiber).

 

Fiber Optic Extension — The extender set consists of an optical transmitter module that converts the DVI / HDMI signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode optical fiber cable. An optical receiver module converts the light pulses back to a DVI / HDMI signal for display on a monitor or projector. The SENDER unit includes an internal EDID memory that can acquire and store the EDID from any display.

 

Cutting-Edge Optics — Most single-fiber optical extenders transmit signals over multiple optical wavelengths, which can suffer from chromatic dispersion over long cable runs.  To avoid this issue, this extender employs a cutting-edge, high-speed SerDes that combines the DVI / HDMI signal channels into a single uncompressed 10.3 Gbps bit stream.  This enables the optical transmission of the signal over a single optical wavelength, which provides increased signal fidelity, stability and flawless image quality, regardless of cable length.  These features make the HFX-2100 series the ideal future-proof choice for systems designers and integrators who need to transmit high resolution DVI / HDMI signals over extreme distances.

Key Features

※     Supports HDMI v1.4(not HDCP compliant)

※     Supports 4K (UHD) and resolutions up to 4096×2160 / 30p

※     Supports 1080p resolution with color depth up to 16 bits/pixel

※     Supports HDMI bit-rates up to 3.4 Gbps/color,10.2 Gbps total

※  12-bit Deep Color

※     Support 3D TV pass-through

※     SENDER includes EDID memory to cache the EDID from any display

※     LPCM 7.1, Dolby® TrueHD, and DTS-HD Master Audio™

※     Plug and Play

※     Built-in EQ(Receiver)

※  Extends signals over a single strand of LC-terminated optical fiber

※     Up to 60Km distance by SMF(According to the SFP+ Transceivers)

※     Low RFI / EMI profile for sensitive applications

※     Surface-mountable

 

Application

※     Digital Signage

※     LED signboards in streets and in stadiums

※     Medical Imaging Equipment

※     Airplane On-board Video System

※     Conference Room Video Equipment

※     Remote monitor for traffic, industrial, military control

※     LCD, Projector, Plasma display connection

※     Large video wall system

※     TV Broadcast Station

※     Home Theater

DATASHEET

Performance
Compliance HDMI v1.4
Maximum Pixel Clock Frequency 340 MHz
Maximum Video Bit Rate 3.40 Gbps
Supported Color Depth 12-bit
Supported Resolutions 1920×1080/60p,3840×2160/30p, 4096×2160 / 30p
Digital Audio Support 7.1 channel LPCM, 192 kHz, 24-bit audio capability
Connections
DVI Input / DVI Output 1x 1HDMI Type-A Female connector
Optical 1x SFP+ port
Cable
Fiber Cable Type / Max. Length 50/125μ OM3-300 Multi-Mode Fiber:   ≤ 1,000 ft. (≤ 300 meters)

9/125μ Single-Mode Fiber:   ≤ 60Km(According to the SFP+)

Extended function
Support IR/232/485/KM None
DDC Support
EDID Pass-through Support An EDID memory built into the Tx module can learn and store the display  EDID info.
HDCP Pass-through Support HDCP communications are NOT supported!
Mechanical
Construction High-impact Alufer enclosure
Dimensions (L x W x H) 89mm x 104 mm x 28.3 mm
Net Weight HFX-2100-S: 500 g              HFX-2100-R: 500 g
Environmental
Operating Temperature 32° to +122° F. (0° to +50° C)
Storage Temperature -40° to +185° F. (-40° to +85° C)
Operating Humidity 5% to 80% (non-condensing)
Storage Humidity 5% to 95% (non-condensing)
Power Requirements
External AC Power Adapter Input: 100-240VAC / 50-60Hz 0.2A
Output: 5VDC, 2.0A    5/2.5mm jack
Power Consumption HFX-2100-S: 2.5 watts             HFX-2100-R: 3 watts
Warranty
Limited Warranty 2 year free warranty