12 port SFP+ 10Gigabit Data Center Switch

分类:
  • 描述
  • Inquiry

Product Overview

12+8+1 10Gigabit Data Center Switch is layer 2 non-blocking switch with Broadcom chip. Providing 258Gbps switching capacity and 192Mpps forwarding performance, L2 / L3 full wire-speed forwarding. Its flexible networking capability ensures the stability of the network and the balance of the load link. With the modular design, it provides 12 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports, 1 Console port, 1 OOB management port, which offer enough bandwidth for data aggregation and data exchange. And in order to flexibly respond to the network requirements, users can select appropriate 10G ports according to their needs.With high bandwidth and low latency, pipe network., 12+8+1 located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or aggregation.

Product Feature

Remarkable performance

  1. With 258Gbps backplane bandwidth, the industry the highest performance (1U TOR);
  2. Hardware routing, wire speed packet rate reached 192Mpps, L2 / L3 forward full speed;
  3. Able to be deployed in the Metropolitan Area Network and provide several last kilometer technology.

Safe and Reliable
1. Provide DOS, DDOS, spoofing and virus defense;
2. Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology;
3. Restrict the maximum number of  hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;

  1. Powerful ACL, support L2-L4 data filtering;
  2. Policy control list and flow regulation.

Convenient in operation and maintenance

  1. Support flexible port configuration;
  2. Management support with Web, SNMP and telnet;
    3.Support XModem protocol, use TFTP/ZMODEM to software upgrading and BootRom upgrading;
    4.Support SFP+, also backwards compatible XFP;
    5. Enter or exit low-power condition from PHY.

Powerful Flow and Broadcast Management  
1. Automatically detect and control broadcast storm, support IGMP packets detection, effectively limit the flooding of broadcast packets;
2. Support Ethernet interface taking 1M as the step length for rate limiting.
3. Support full duplex mode and half duplex mode flow control;

  1. Support IP multicast and QoS.

Product’s Technical Parameters

Product model 12+8+1
Basic Characteristics
Fixed port 12 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports
Console port 1
Backplane bandwidth 258Gbps
Packet forwarding rate 192Mpps
Jumbo frames 12k bytes
Transfer mode Support store-forward mode and cut-through mode
IPv4/IPv6 route 512/256
MAC address table 16K
Packet Buffer 2MB
VLAN ID 4K
Memory capacity 512MB DDR3 SDRAM
Flash memory capacity 8MB
CPU 600 MHz ARM Cortex-A9 single-core processor
Soft Specification
Security feature IP+MAC+PORT+VLAN binding

ARP inspection

DOS defend

Port protect

IP Source Guard binding

VLAN Port based VLAN

802.1Q VLAN

IP based VLAN

MAC based VLAN

MAC address table Static MAC address table

Dynamic MAC address table

Storm Control Broadcast suppression

Multicast suppression

DLF suppression

Limiting rate

Traffic Control Half-duplex control based on the back pressure type

Full-duplex control based on the PAUSE frame

Port Mirror Support port mirror
Port management General setting

Port counting

Config port

Port trunk

Port-isolation

QoS IEEE 802.1Q Congestion mechanism

Each port has 8 send queue mapping to 8 802.1p priority

IP services Ping detection

DHCP Snooping

Spanning Tree Protocol MSTP(802.1s)、STP、RSTP
Multicast management IGMP Snooping frame
System management Support SNMP v1/v2

Support Console

Support TELNET

Support WEB

Remote Upgrade Support version upgrading via web     Support version upgrading via local
Physical Characteristics
External Dimension 440mm*285mm*44mm
Power Supply Features AC: 110V~260V
Power ≤100W
Indicator light Power indicator, system, connection/sending and receiving instructions
Environment temperature/humidity Operating temperature: 0°C~50°C (0m~1800m) ;

Storage temperature: -40°C~+70°C;

Relative humidity: 5%RH~95%RH, Non-condensing.